 |
|
| |
|
Shopping Basket:
|
|
0 item(s) in your basket
|
£0.00
|
|
Your basket is empty
|
|
|
|
|
|
|
|
Spend just a few minutes to set up your CatGenie
then enjoy litter box freedom for the rest of your life.  |  | CatGenie in a bathroom requires an easy, one time Do-It-Yourself connection to fresh, COLD water intake, a toilet and an electric outlet. See the Simple Set Up Guide for complete details. | | | 1) Turn mains water off as a precaution.
Use supplied self-cutting tap to connect to the toilet or sink cold water line. (5 mins)
2)Screw the CatGenie water hose to the self-cutting tap. (2 minutes). Be careful not to over-tighten or get cross threaded.
3) Turn the mains water back on, turn on the self cutting tap & check for leaks. (2 minutes) | | 4) Hook the CatGenie drainage hose over the
rim of the toilet and under the seat. You can
keep it there and still use the toilet. (1 minute) NB: For best performance and convenience it is best to plumb in permanently using a suitable waste outlet connection available from DIY stores.
5) Plug into an electric outlet. (30 secs)
You can pre program your CatGenie to run
automatically up to four times a day or simply
push a button to start. (Please consult a qualified electrician or call us for bathroom / toilet wiring advice)
|
| | Please Note: For more modern properties / flats etc a flexible cold water hose may be available that can be connected into with a T piece or screw fitting available from DIY stores. Please call us or consult a qualified plumber for further advice. |
|
|
|
|
Calls to 0844 numbers are max 3.92p per min (Inc VAT) from a BT landline (May 09)
|
